Ukulele Hut

Your Ukulele Vacation


Finishing Ukulele Surface

Using various grits of sandpaper, sand body and neck making sure all scratches and excess glue are removed, e.g.. start with 100, then 150, 220 and 320. Always sand with the grain.




  • First <<
  • < Prev
  • Next >
  • >> Last
  • Ukulele Assembly Sequence
  • Constructing the ‘Ukulele Neck
  • Shaping of the Neck and Tail Blocks
  • Layout and Bending of ‘Ukulele Sides and Lining
  • Gluing Up of Top and Back of ‘Ukulele
  • Sanding and Shaping of Ukulele Sound Board and Back
  • Installing Neck onto ‘Ukulele Body
  • Glue in Top Lining and Top Braces
  • Gluing on Sound Board of the ‘Ukulele
  • Gluing in of Bottom Lining and Back Bracing
  • Gluing on Back of ‘Ukulele
  • Finishing Ukulele Surface
  • Making of Fret Board and Ukulele Bridge
  • Drilling of Holes for Ukulele Tuning Keys
  • Final Finishing of Ukulele

This entry was posted on Saturday, March 21st, 2009 at 8:02 pm and is filed under Build-Make an Ukulele. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

    • Build/Make an UkuleleLearn how to build/make your very own ukulele in 15 steps
    • Ukulele HistoryA brief history of how the ukulele got its name the "ukulele"

Copyright © Ukulele Hut - Powered by WordPress
Contact Ukulelehut.com