Installing Neck onto Ukulele Body
1. Using neck jig, clamp on neck based on thickness of sound board.
2. Using pilot drill, drill three holes in triangle shape through the neck block into neck. Wax screws, apply glue to neck, and secure neck to body with the screws.
- Ukulele Assembly Sequence
- Constructing the 'Ukulele Neck
- Shaping of the Neck and Tail Blocks
- Layout and Bending of 'Ukulele Sides and Lining
- Gluing Up of Top and Back of 'Ukulele
- Sanding and Shaping of Ukulele Sound Board and Back
- Installing Neck onto 'Ukulele Body
- Glue in Top Lining and Top Braces
- Gluing on Sound Board of the 'Ukulele
- Gluing in of Bottom Lining and Back Bracing
- Gluing on Back of 'Ukulele
- Finishing Ukulele Surface
- Making of Fret Board and Ukulele Bridge
- Drilling of Holes for Ukulele Tuning Keys
- Final Finishing of Ukulele